EPA 608 Plan

EPA 608 practice question: Type II — medium, high and very high-pressure appliances

Type II — medium, high and very high-pressure appliancesDifficulty 3/5

Under 40 CFR 82.157, what annual leak rate triggers the repair requirement for commercial refrigeration equipment?

  1. AThirty percent, for appliances with a full charge of fifty pounds or more
  2. BTen percent, for appliances with a full charge of fifty pounds or more
  3. CFifteen percent, for appliances with a full charge of twenty pounds or more
  4. DTwenty percent, for appliances with a full charge of fifty pounds or more
Show answer and rationale

Correct: D. Section 82.157(c)(2) sets three thresholds: twenty percent for commercial refrigeration, thirty percent for industrial process refrigeration, and ten percent for comfort cooling and everything else. All are gated on a fifty-pound full charge.

  • A — Thirty percent is the industrial process refrigeration threshold, not the commercial one.
  • B — Ten percent covers comfort cooling and other appliances not in the first two categories.
  • C — Fifteen percent is not a threshold in the rule, and the charge gate is fifty pounds.

Concept being tested

25 items. Leak detection and the leak repair rules, the Table 1 evacuation levels and how they change with charge size and equipment age, major versus non-major repairs, the prohibition on system-dependent equipment above 15 pounds, pressure-temperature relationships, and ASHRAE Standard 15 equipment-room requirements. — 25% of the exam. Study guide for Type II — medium, high and very high-pressure appliances.

Related questions

Practice this topic

Blueprint-mapped questions with full rationales for every choice.

Start practice

Primary references

  1. 40 CFR Part 82 Subpart F — Recycling and Emissions Reduction — Office of the Federal Register (eCFR) · government · retrieved 2026-09-22, verified 2026-09-22
Last reviewed: 2026-10-07Reviewed by: David Miller, CM, EPA Universal, HVAC/R master technician & refrigerant compliance reviewHow we verify facts